Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel on a New Beetle

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Door trim panel

Learn how to remove the door panel (right side) on a Volkswagen New Beetle. Before starting the disassembly, disconnect the battery terminals located in the boot. Begin the disassembly: use a lever to remove the plastic cover above the door handle, then use a screwdriver to unscrew the securing screws located there. Once all screws are removed, use the lever to detach the window switch panel and all the plastic clips securing the door. Pull the door panel away with your hands, disconnect any power connectors and release cables. Remove the metal panel if you need to work inside the door.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen New Beetle (1999-2012 / MK 2, 9C) Remove the right front door panel on the Volkswagen New Beetle: disconnect the battery terminals located in the engine compartment. Using a screwdriv…
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Replacing the window regulator motor on a New Beetle? Remove the cover panel to access the window regulator motor. Unscrew the internal door handle a…
Volkswagen New Beetle (1999-2012 / MK 2, 9C) To replace the window regulator on the Volkswagen New Beetle, first loosen the two screws securing the door panel at the bottom. Once these screws ar…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos