Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the heating of the Volkswagen Tiguan MK1

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Radiator

See other generations:
Video tutorial

In this video we see a Volkswagen Tiguan that has a heating problem that works properly on the driver's side, while on the passenger side it does not work at all, even after a period of time exceeding thirty minutes from the start of the vehicle. The fan works fine, the electrical part is working, so the problem lies in the heating radiator, which is located in the driver's footwell, behind a partition on the right side.

To remove it, however, we will have to dismantle the fuse box, the lower part of the steering wheel, and finally we can remove the bolt that secures the partition of the footwell cover. Behind it there is a plastic cap held by three screws, and behind that we will find our radiator.

In front of it we have the piping that needs to be removed and drained, after which we can remove the radiator and replace it with a new one, which we can find on autoricambi24.it with the code 467H0054 at the price of 35.49 euros. This will solve the problem of the lack of heating in part of the cabin.


Posted on 10 August 2025 by ScegliAuto


Related tutorials

Volkswagen Tiguan (2007-2016 / 5N, MK 1) In today's video, see how to replace the heater radiator in the first series of the Volkswagen Tiguan. First, ensure the engine is cold to avoid pote…
Volkswagen Tiguan (2007-2016 / 5N, MK 1) If the heating in your Volkswagen Tiguan has suddenly stopped working, first check the status of the relevant fuse, which is shown in this video. As …
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Before starting, open the bonnet of your Volkswagen Tiguan. Begin by removing the entire air filter housing, disconnecting the hoses and unscrewing t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos