Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Arm Bushing from a Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Bushings

Learn how to remove the front arm bushing from a Volkswagen Golf. Place the car on a column lift and loosen the wheel bolts with a telescopic wrench, then lift the vehicle to your preferred height and remove the wheel. Use a socket wrench to undo the lower securing bolt of the arm and the bolt mounted under the wheel hub, then undo the bolts on the top of the arm as shown in the video. Remove the bushing from the bolt housing. Now begin installing the new part: fit the new bushing, tightening all bolts onto the threads. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Gear Lever Bush on a Volkswagen Golf GTI
Replacing the Gear Lever Bush on a Volkswagen Golf GTI
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this guide, we will see the main instructions for removing and replacing the gear lever bush on a Volkswagen Golf GTI, as well as on the Bora and …
Replacement of Silentblock Bush for Wishbone
Replacement of Silentblock Bush for Wishbone
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) If the rubber damper of the wishbone suspension has failed, it is often possible to purchase just the bush from the aftermarket rather than the entir…
Replacement of Silent Block on Wishbone
Replacement of Silent Block on Wishbone
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The failure of the silent blocks (rubber bushes) on the front suspension wishbones is a common issue. You can address this fault either by replacing …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos