Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change indicator light on the Polo 6

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In today's article, we will see how to reset the oil change indicator light on the Volkswagen Polo 6. To perform the reset, you need to insert the key without turning it, then press and hold the 0.0\SET button. While holding it down, start the ignition, once the ignition is on, within 20 seconds release the button and press the button on the left side of the dashboard.

If the procedure was successful, the service light will turn off. It is recommended to perform this procedure only after having had the car serviced and the oil changed, and in case the light remains on.


Posted on 18 September 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on the Volkswagen Polo?
How to Reset the Oil Change Light on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this tutorial, see how to remove the oil change light on the Volkswagen Polo 6, a very simple and quick operation, to be followed only after chang…
How to reset the oil change light on a 2016 Volkswagen Polo?
How to reset the oil change light on a 2016 Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Through this video, you can learn how to reset the oil change light on a 2016 Volkswagen Polo. The tutorial also applies to all vehicles of the same …
How to Reset the Engine Oil Light on a Volkswagen Polo
How to Reset the Engine Oil Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This guide shows you how to reset the service light for the engine oil change on a Volkswagen Polo. First, get in the car and turn on the ignition; t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos