Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light of the Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Service warning light

Below we will see the information that will allow us to reset the maintenance reminder (service) of the Volkswagen Passat. First of all, we get into the car and start the instrument panel; then we use the steering wheel controls to enter the car settings, then go to the service submenu and confirm the reset of the maintenance key (pressing the "ok" button on the steering wheel), as shown in the video. At this point, we turn off the instrument panel and start the engine, verifying the correct reset of the service light!

Posted on 19 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the VW Passat B8
How to reset the service light on the VW Passat B8
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) The procedure for resetting the maintenance light on the Volkswagen Passat model b8 follows very simple steps. The first step is to turn on the instr…
Resetting the Service Indicator on a Volkswagen Passat
Resetting the Service Indicator on a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) These brief and simple steps will show you how to reset the service indicator on a Volkswagen Passat. First, get into the vehicle and press and hold …
How do you reset the Service light on the Volkswagen Passat?
How do you reset the Service light on the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) The procedure for resetting the Service light on the Volkswagen Passat involves holding down the SET button located to the right of the instrument pa…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos