|
Do it yourself
| |||
| ||||
Replacement of the air conditioning pressure sensor of the Volkswagen Golf
Model: Volkswagen Golf
Golf IV, MK 4, Golf 4
- Years 1997-2003
Today we will discover the instructions that will allow us to disassemble and replace the air conditioning pressure sensor of the Volkswagen Golf. First of all, we open the hood of the car and begin to locate the sensor in question, which we find on the upper left side of the engine compartment; then we disconnect the electrical connector of the sensor and use a socket wrench to remove it, as shown in the video. At this point, we properly attach the new air conditioning pressure sensor, finally making the electrical connection; we verify the correct operation of the air conditioner.
Posted on 6 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(1997-2003 /
Golf IV, MK 4, Golf 4)
This guide outlines the steps to remove and replace the air conditioning pressure sensor on the Volkswagen Golf GTI. First, open the bonnet and locat…
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
The pressure switch of the air conditioning system is clearly shown in the video, and as demonstrated, you need to access it from underneath the vehi…
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
Today's instructions will allow us to remove and replace the air conditioning compressor on a Volkswagen Golf 1.6 TDI. First, lift the vehicle and st…
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.111
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
