Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear brake pads on the Volkswagen Tiguan?

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Brake pads

See other generations:
Video tutorial

To replace the rear brake pads of the Volkswagen Tiguan, you will need to lift the car with a jack or a lift, to ensure that the corresponding wheel is not in contact with the ground: once the car has been lifted, you will need to loosen the bolts that secure the wheel to the corresponding hub. This will allow you to remove it completely and loosen the screws that secure the brake caliper to the respective disc: at this point, you will be able to remove the pads so that the new ones can be inserted and their operation verified.


Posted on 16 October 2025 by ScegliAuto


Related tutorials

How to Change the Key Battery of a Volkswagen Tiguan
How to Change the Key Battery of a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Replacing the battery in the remote key of a Volkswagen Tiguan is a simple task. First, take the key remote and press the button located in the upper…
How to Replace the Cabin Air Filter on the 2018 Volkswagen Tiguan
How to Replace the Cabin Air Filter on the 2018 Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Despite its somewhat hidden position, replacing the cabin air filter in your 2018 Volkswagen Tiguan is particularly simple and quick. Here's how. Fir…
How to Remove the Starter Motor from a Volkswagen Tiguan
How to Remove the Starter Motor from a Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Before starting, open the bonnet of your Volkswagen Tiguan. Begin by removing the entire air filter housing, disconnecting the hoses and unscrewing t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos