Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the shark fin antenna on a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Antenna

Installing the shark fin antenna on a Volkswagen Golf MK 4 is a simple and quick operation that can be done independently. The antenna can be purchased online or at auto parts stores and provides the vehicle with better radio signal reception. To install the antenna, we must first remove the previous antenna; unscrew the antenna base and disconnect the cable. Connect the antenna cable to the new reception base and remove the plastic cover to glue the new antenna to the vehicle's body through the adhesive. After completing the installation, it may be necessary to reprogram the radio channels.

Posted on 7 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna on a Volkswagen Golf?
How to Replace the Antenna on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the antenna on a Volkswagen Golf, you need to remove the headlining in the rear section of the car, where the antenna housing is located: …
Replacing the Antenna of the Volkswagen Golf
Replacing the Antenna of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today, we will go through the main instructions to remove and replace the radio antenna of the Volkswagen Golf. First, open the vehicle's bonnet and …
How to replace the antenna on a Volkswagen Golf?
How to replace the antenna on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the antenna on a Volkswagen Golf, begin by removing the interior trim of the car's roof, using a suitable tool to pry it off: once the roo…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos