Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headlight Switch

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Dashboard

See other generations:
Video tutorial

To remove the headlight switch, proceed as follows: - Ensure the switch is in the off position (lights off); - Press the knob inwards until it retracts by about a couple of millimetres; - While holding it in, rotate the knob until the indicator notch is in the middle position between off and on: in this position, you can extract the headlight switch from its housing; - Then disconnect the connector at the back by pressing the two side tabs.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Adjusting the Headlights on a Volkswagen Golf
Adjusting the Headlights on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below are the steps to adjust the front headlights on a Volkswagen Golf. First, get in the vehicle and start the engine, then switch on the lights; i…
Removing the Light Switch on a Golf 7
Removing the Light Switch on a Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Want to remove the light switch knob? Here's how to take it off from inside the dashboard of a Golf. The knob to be removed is located on the left si…
Check the Reverse Light Switch
Check the Reverse Light Switch
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) If the reverse lights do not illuminate when engaging reverse gear, first ensure that the bulbs are functioning and that voltage is reaching the resp…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos