Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check the Reverse Light Switch

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

If the reverse lights do not illuminate when engaging reverse gear, first ensure that the bulbs are functioning and that voltage is reaching the respective lamp holders: if there is no voltage, it is likely an issue with the reverse light switch. This switch is located on the gearbox, near the gear levers, just below the battery compartment; to assess its functionality, disconnect the connector and check its closure with reverse engaged using a multimeter set to the 200K Ohm scale, touching the switch contacts with the probes.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Reverse Light Switch
Replacing the Reverse Light Switch
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) If the reverse lights do not illuminate when engaging reverse gear, first check the condition of the bulbs and the corresponding fuse. If everything …
Where is the Reverse Light Switch Located on the Volkswagen Golf?
Where is the Reverse Light Switch Located on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This video shows where the reverse light switch is located on the Volkswagen Golf and how to proceed if you need to remove it, a very simple task. As…
How to Replace the Hazard Light Switch on the Volkswagen Golf
How to Replace the Hazard Light Switch on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, we will go through the procedure for removing and replacing the hazard light switch on the Volkswagen Golf. First, get inside the cabin and st…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos