Do it yourself
Frequently asked questions about cars and motorcycles

Where is the reverse light switch located in the Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

In this video we can see where the reverse light switch is located in the Volkswagen Golf and how to proceed in case we need to remove it, a very simple operation. As shown, the switch in question is located in the upper area of the transmission, on the left side. Before accessing it, make sure the engine is cool enough, then open the hood and remove the air filter box. Disconnect the power connector indicated, unscrew the single fixing bolt with a 22mm wrench and remove the switch from the housing.

Posted on 6 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) If the reverse lights do not illuminate when engaging reverse gear, first ensure that the bulbs are functioning and that voltage is reaching the resp…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) If the reverse lights do not illuminate when engaging reverse gear, first check the condition of the bulbs and the corresponding fuse. If everything …
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today we will see the process of disassembly and replacement of the switch or power button for the hazard lights of the Volkswagen Golf. First, we ge…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos