|
Do it yourself
| |||
| ||||
How to replace the rear light bulb of the 2016 Volkswagen Golf.
Model: Volkswagen Golf
Golf VII, MK 7, Golf 7
- Years 2012-2019
Replacing the rear headlight bulbs of the 2016 Volkswagen Golf is a task that can be done independently. To perform the operation, we need to open the trunk and remove the carpet cover on the side of the headlight where we need to replace the bulb. We unscrew the nut that secures the headlight from inside the body, then disconnect the connector and, using a plastic lever, remove the headlight from its housing. We open the light fixture and replace the bulb. We close the light fixture and push the headlight back into its housing to secure it. We reconnect the connector and tighten the locking bolt. Finally, we close the trunk and start the vehicle to test the proper functioning of the bulb; if it does not work, it will be necessary to check the operation of the fuse related to the rear headlight.
Posted on 16 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
To replace the front headlight bulb of the Volkswagen Golf 6, lift the bonnet to access the rear of the headlight corresponding to the bulb to be rep…
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
Are the bulbs in the rear headlamp of your VW Golf 5 blown and need changing? Here's how to do it. Open the rear hatch of the boot. Locate the inspec…
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
To replace the front headlamp bulb of the Volkswagen Golf 6, open the bonnet to access the back of the headlamp where the bulb needs to be replaced. …
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.128
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |