Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Volkswagen Passat.

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part:

In this guide, we will discover the steps that will allow us to reset the tire pressure warning light of the Volkswagen Passat; before performing the reset of the TPMS sensors, it is necessary for all four tires to be at the correct operating pressure. So, let's get inside the vehicle and start by turning on the instrument panel; we open the glove compartment to access the TPMS reset button, holding it down for about three seconds until the tire pressure warning light is correctly reset on the instrument panel. Finally, we turn off the panel and start the engine, completing the reset operation.

Posted on 23 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Volkswagen Passat
How to Reset the Tyre Pressure Warning Light on the Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) In today's tutorial, we will see how to reset the tyre pressure warning light on the Volkswagen Passat; before performing this operation, ensure that…
Reset Tyre Pressure Light on Volkswagen Passat
Reset Tyre Pressure Light on Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) In this tutorial, you will learn how to reset the tyre pressure monitoring system (TPMS) light on a fourth-generation Volkswagen Passat. Before perfo…
How to reset the tyre pressure warning light on the Volkswagen Passat?
How to reset the tyre pressure warning light on the Volkswagen Passat?
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) The tyre pressure warning light on the Volkswagen Passat can be reset by first inflating the tyres to the recommended pressure value: this value is i…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos