Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : Anti-theft pin disassembly instructions

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3C, B6 - Years 2005-2010
Part: Tires
Operation: Anti-theft pin disassembly instructions

Many cars, especially if equipped with alloy rims, also have the so-called anti-theft pin (one on each wheel): it is a particular pin whose head has a particular geometry such that it can be unscrewed only if it is in possession the relevant key; in case of loss of this key it becomes theoretically impossible to unscrew this pin, above all because the head is cylindrical; a solution may be to use a star-shaped and non-hexagonal ball wrench, slightly smaller than the diameter of the head itself, by forcing it on the pin itself and then unscrewing it.


Posted on 23 August 2023 by ScegliAuto



How to activate and deactivate the anti-theft system on the Volkswagen Passat.
Volkswagen Passat (2005-2010 / 3C, B6) .. will show us how to activate and deactivate the anti-theft system, if equipped, of the Volkswagen Passat. First, we take our remote control and press..
How do you deactivate the anti-theft alarm of the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) .. In order to deactivate the anti-theft alarm of the Volkswagen Passat, you need to turn on the instrument panel so that you can access..
How to replace the front brake pads of the Volkswagen Passat B6 version.
Volkswagen Passat (2005-2010 / 3C, B6) .. we need to remove the wheel cover; if we have anti-theft bolts, we need to use the appropriate adapter. Then, we remove the wheel. Next, we need to..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos