|
Do it yourself
| |||
| ||||
How to Use the Tyre Repair and Inflate Kit
Model: Volkswagen Passat
3BG, B5
- Years 1996-2005
More and more cars come equipped with a tyre repair and inflation kit as standard, a valid alternative even for those who have a spare wheel but prefer not to change it themselves.
The usage is very simple and takes only a few minutes, which is very important since in most cases we will be using it with the car stopped at the roadside, possibly in traffic. Here’s how it works. The example shown in the video includes a sticker to place on the steering wheel to remind us to visit a tyre fitter as soon as possible to have the tyre properly repaired. Once the sticker is applied, position the compressor near the punctured wheel, connect the black hose to the adhesive bottle and the red one to the valve of the affected wheel. At this point, plug the compressor's power supply into the car's cigarette lighter and turn it on. This will start the flow of adhesive into the tyre, which will settle permanently once we start driving.
Updated on 31 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Passat
(2014-2023 /
B8, 3G, MK 8)
If the tyre warning light on the instrument panel of your Volkswagen Passat (2020 model) remains illuminated, it means that the relevant sensors have…
Volkswagen Passat
(2010-2014 /
B7)
Inside the fuel filler flap, there is a label indicating the pressure level to which you should inflate the tyres, depending on the size and load con…
Volkswagen Passat
(2010-2014 /
B7)
To reset the tyre pressure warning light on the Volkswagen Passat, first inflate the tyres to the correct pressure value, which is indicated on the s…
Other guides you may be interested in
|
How to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.082
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
