Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Volkswagen Golf 8

Model: Volkswagen Golf Golf 8, MK 8, Golf Viii - Years 2019-2026
Part: Shift knob

Replacing the gear knob of your Volkswagen Golf Mk8 is really a very simple operation to carry out. To complete the procedure, you just need to carefully read the following guide and apply all the described steps. First, enter the cabin of your Volkswagen Golf and then shift your attention to the gear lever. At this point, grab the knob and pull it firmly upwards until it is completely removed. Once you have done this, the procedure is successfully completed, but you can proceed with installing a new knob.

Posted on 29 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear knob of a Volkswagen Golf?
How to remove the gear knob of a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Good morning, to remove the gear knob of our Volkswagen Golf, we take a seat inside the car. We carefully observe the gear knob, located on the gear …
Removing the Gear Knob and Gaiter of the Volkswagen Golf DSG
Removing the Gear Knob and Gaiter of the Volkswagen Golf DSG
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this tutorial, learn how to remove and replace the gear knob and gaiter of the Volkswagen Golf. First, get inside the vehicle and start by removin…
Replacing the Gear Knob on the Volkswagen Golf
Replacing the Gear Knob on the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This guide shows you how to remove and replace the gear knob on the Volkswagen Golf by following these simple steps. First, get into the vehicle and …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos