Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wishbone on a Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Control arm

In this guide, we will go through the instructions to dismantle and replace the front wishbone on a Volkswagen Passat. First, lift the vehicle and start by removing the front wheel. Next, remove the lower engine cover by unscrewing the bolts securing the wishbone and then disconnect the joint, as shown in the video. At this point, remove and replace the wishbone with the new one, installing the original part. Secure the wishbone properly and perform the same procedure for replacing the other wishbone!

Updated on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wishbone Ball Joint on a VW Passat B6
How to Replace the Wishbone Ball Joint on a VW Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) If you hear a noise from the front suspension while driving over rough surfaces and the wheel feels loose, it is likely that the wishbone ball joint …
Replacement of Front Wishbone Bushes
Replacement of Front Wishbone Bushes
Volkswagen Passat (2005-2010 / B6, 3C) Worn bushes (silent blocks) in the suspension make the vehicle particularly noisy, especially when driving over rough surfaces, and compromise its st…
Removing the Front Shock Absorbers from the Volkswagen Passat
Removing the Front Shock Absorbers from the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Follow this step-by-step guide to remove and replace the front suspension of the Volkswagen Passat. First, lift the vehicle and remove the front whee…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos