Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Wishbone Bushes

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Bushings

See other generations:
Video tutorial

Worn bushes (silent blocks) in the suspension make the vehicle particularly noisy, especially when driving over rough surfaces, and compromise its stability. To replace the bushes of the suspension wishbone, you need to remove it at least from the engine side to extract the old ones and insert the new ones.

Lift the vehicle on a hydraulic lift, remove the splash guard, and then the fixing pins of the wishbone. Once the wishbone is lowered, extract the old bushes and insert the new ones using a bush, washer, and threaded bar system.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Wishbone on a Volkswagen Passat
Replacing the Front Wishbone on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) In this guide, we will go through the instructions to dismantle and replace the front wishbone on a Volkswagen Passat. First, lift the vehicle and st…
How to Replace the Wishbone Ball Joint on a VW Passat B6
How to Replace the Wishbone Ball Joint on a VW Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) If you hear a noise from the front suspension while driving over rough surfaces and the wheel feels loose, it is likely that the wishbone ball joint …
Replacing the Front Wheel Hub Bearing
Replacing the Front Wheel Hub Bearing
Volkswagen Passat (1996-2005 / 3BG, B5) To replace the front wheel hub bearing, you need to remove the hub itself; start by lifting the vehicle on a lift and removing the front wheel from t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos