Do it yourself
Frequently asked questions about cars and motorcycles

Volkswagen Passat - Arm

Volkswagen Passat (2005-2010 / B6, 3C)
Remove the rear arm on Volkswagen Passat

Remove the rear arm on Volkswagen Passat? Let's see carefully how to do it: we loosen the pins of the rim with a special tool (telescopic wrench or compressed …read all…
Posted on 7 November 2023 by ScegliAuto
Volkswagen Passat (2005-2010 / B6, 3C)
How to replace the head of the swing arm of the VW Passat B6

If you hear a noise coming from the front suspension while driving on the bumpy road and the wheel seems to have some play, then it is very likely that the …read all…
Posted on 11 October 2023 by ScegliAuto
Volkswagen Passat (1996-2005 / 3BG, B5)
Steering box tie rod head replacement

In order to replace the ball head of the steering box tie rod, lift the car on a lift and remove the front wheel; then disassemble the pin fixing the head to …read all…
Posted on 20 August 2023 by ScegliAuto
Volkswagen Passat (1996-2005 / 3BG, B5)
Disassembly of the upper swinging arm

The upper oscillating arm of the front suspension in the case of the car in question has a rather particular geometry, in fact it is made up of two connecting …read all…
Posted on 26 July 2023 by ScegliAuto
Volkswagen Passat (1996-2005 / 3BG, B5)
Guide on replacing and removing the arm

When carrying out an operation such as changing the arm it is necessary to make sure that you have a kit of keys, a hydraulic jack to lift the car on the side …read all…
Posted on 21 July 2023 by ScegliAuto

Cigarette Lighter (4) Airbags (1) Alternator (2) Loudspeaker (7) Shock absorbers (1) Air conditioning (3) Car stereo (24) Battery (25) Air Vents (6) Bushings (1) Arm (5) Gearbox (2) Spark plugs (6) Glow plugs (6) Bodywork (4) Glove box (4) Control unit (1) Key (78) Locking the trunk (2) Timing belt (28) V-belt (5) Air conditioning (12) Air conditioning controls (2) -board computer (18) Checks and maintenance (165) Throttle body (2) Dashboard (9) Gearshift gaiter (3) Drive shaft boot (1) Bearing (3) Brake discs (5) Rear bench seat (2) Headlight (14) Tail light (8) Fog lights (5) Particulate filter (1) Air filter (15) Cabin air filter (24) Petrol filter (1) Diesel filter (9) Oil filter (6) Hand brake (5) Clutch (2) Injectors (1) Window lift switch (5) Accessory Kit (2) Xenon headlight kit (1) Light bulb (14) Side turn signal light bulb (3) Headlight bulb (23) Rear light bulb (5) Interior lights ceiling light bulb (6) Antifreeze liquid (3) Dashboard light (3) License plate light (3) Third brake light (1) Handle (3) Muffler (1) Engine (11) Window motor (4) Starter motor (4) Gear oil (3) Engine oil (12) Door panel (29) Windshield (1) Front bumper (10) Rear bumper (3) Brake pads (12) Hydraulic pistons (5) Tires (8) Gear Shift Knob (4) Pump (5) Fuel pump (11) Door (2) Push button (2) Window lift button (2) Instrument cluster (32) Radiator (4) Passenger compartment heating radiator (17) Wheel (3) Fuse box (64) Seat (16) Drive shaft (4) Crankshaft RPM sensor (1) Coolant temperature sensor (2) Parking sensors (1) Lock (4) Suspensions (5) Outside rearview mirror (17) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (5) Thermostat (11) Steering rods (3) Central tunnel (2) Turbine (6) Valve (1) EGR valve (4) Interior blower (2) Side window (1) Steering wheel (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos