Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Replacement of Engine Air Filter

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Air filter

Open the front bonnet and ensure it is securely supported: the air filter housing is located at the rear left (when facing the engine). First, disconnect the connector attached to the mass air flow sensor (MAF) to facilitate disassembly. Unscrew the fixing screws of the cover (without removing them), lift the cover, and extract the old air filter. Remove any debris from the filter housing, then apply the new filter and screw the cap back on. Finally, reconnect the MAF sensor.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Engine Air Filter
Replacing the Engine Air Filter
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The engine air filter housing (air box) is located centrally, just behind the rocker cover: once you have unscrewed the fixing screws of the cover, l…
How to Replace the Brake Pedal Switch on the Volkswagen Golf?
How to Replace the Brake Pedal Switch on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the brake pedal switch on the Volkswagen Golf, open the bonnet and access the engine bay. Here, you will need to loosen the bolts securing…
Removing the rear tailgate panel of the Volkswagen Golf
Removing the rear tailgate panel of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This guide will illustrate the steps to remove and replace the tailgate panel of the Volkswagen Golf. First, open the tailgate and start unscrewing t…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos