Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Passat?

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Service warning light

To clear the Service light displayed on the instrument cluster of the Volkswagen Passat, press and hold the button at the bottom right of the instrument cluster while it is off: continue holding it down to insert the key into the ignition and turn it to activate the cluster. Once the cluster is on, release the button and then turn the one on the left side: this will clear the Service light, and you can turn off the cluster by removing the key.

Posted on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on a Volkswagen Passat B7?
How to reset the Service light on a Volkswagen Passat B7?
Volkswagen Passat (2010-2014 / B7) To reset the Service light on a Volkswagen Passat B7, press and hold the 0.0/SET button located on the right side of the instrument cluster. While ho…
How to Reset the Service Light in a Volkswagen Passat 3C?
How to Reset the Service Light in a Volkswagen Passat 3C?
Volkswagen Passat (2005-2010 / B6, 3C) Let's proceed with a DIY method to reset the service light in the Volkswagen Passat 3C, using the procedure presented in the attached tutorial video.…
How to Reset the Service Indicator on a Volkswagen Passat
How to Reset the Service Indicator on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) These brief and simple steps will illustrate the procedure to reset the maintenance warning (service) on a Volkswagen Passat. First, get inside the v…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos