Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part:

In this tutorial, you will see how to reset the tyre warning light on a Volkswagen Jetta, a very simple and quick operation, to be performed only after restoring the correct pressure of each tyre according to the instructions in the manual. First, go inside the cabin, then insert the key and turn on the instrument panel. Next, open the glove compartment on the passenger side, locate the "SET" button, and hold it down until the light disappears from the dashboard. To complete the procedure, simply restart the vehicle.

Posted on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Volkswagen Jetta 6?
How to Reset the Tyre Warning Light on the Volkswagen Jetta 6?
Volkswagen Jetta (2010-2018 / MK 6, A6) To reset the tyre warning light on your Volkswagen Jetta sixth generation, simply follow these steps. First, enter the vehicle and turn the ignition …
How to Reset the Tyre Pressure Light on a Volkswagen Jetta?
How to Reset the Tyre Pressure Light on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, we will see how to reset the tyre pressure light on a Volkswagen Jetta, a very simple and quick operation to perform only after res…
How to reset the tyre warning light in the Volkswagen Jetta?
How to reset the tyre warning light in the Volkswagen Jetta?
Volkswagen Jetta (2018-2025 / A7, MK 7) Resetting the tyre warning light in the Volkswagen Jetta, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, e…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos