Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Volkswagen Golf 1.4

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Timing belt

See other generations:
Video tutorial

Below, we will discover how to remove and replace the timing belt on the Volkswagen Golf 1.4. First, open the bonnet of the vehicle and start by removing the coolant reservoir, then also remove the engine mount; lift the vehicle and remove the front right wheel, then disconnect the auxiliary belt and remove the crankshaft pulley, as shown in the video.

At this point, proceed with the removal of the timing belt, replacing it with a new original one; then reassemble all previously removed parts.


Posted on 8 April 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below we will discover information on how to disassemble and replace the timing belt of the Volkswagen Golf 1.6 TDI; the manufacturer states that, on…
Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's main information will show you how and when to replace the timing belt on a Volkswagen Golf 1.4 TSI. For this type of engine, the timing belt…
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Guide to Replacing the Water Pump and Timing Belt on the Volkswagen Golf 1.8T
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's guide will show you the main steps on how to remove and replace the water pump and timing belt on the Volkswagen Golf 1.8T. For simplicity an…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos