Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, we’ll see how to reset the service on a Volkswagen Polo, an extremely simple and quick operation to perform only after completing all scheduled maintenance work. First, enter the cabin, then insert the key but leave it in the initial position.

Press and hold the button in the centre of the dashboard, simultaneously turn on the instrument cluster, and after about two seconds, release the button and then turn it clockwise. At this point, just complete the procedure by restarting the vehicle.


Posted on 8 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Volkswagen Polo
How to Reset the Service Light on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this guide, discover how to reset the service light for the routine maintenance oil change on the Volkswagen Polo. First, get into the vehicle and…
How to Reset the Service Light on Volkswagen Polo
How to Reset the Service Light on Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Below we will discover the steps that will allow us to reset the service light for routine maintenance on the Volkswagen Polo. First, get in the vehi…
How to reset the maintenance service indicator on the Volkswagen Polo
How to reset the maintenance service indicator on the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Below we will see the steps that will allow us to reset the maintenance service light of the Volkswagen Polo. First of all, we get on board the car a…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos