|
Do it yourself
| |||
| ||||
How to Reset the Tyre Warning Light on Volkswagen Jetta?
Model: Volkswagen Jetta
MK 6, A6
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
In this tutorial, we will see how to reset the tyre warning light on the Volkswagen Jetta, a very simple and quick operation to perform only after restoring the correct pressure in each tyre according to the instructions in the manual. First, go inside the cabin, then insert the key and turn on the ignition. Next, open the glove compartment on the passenger side, locate the "SET" button, and hold it down until the light disappears from the dashboard. To complete the procedure, simply restart the vehicle.
Posted on 4 May 2026 by ScegliAuto
Related tutorials
Volkswagen Jetta
(2010-2018 /
MK 6, A6)
In this tutorial, you will see how to reset the tyre warning light on the Volkswagen Jetta, an extremely simple and quick operation to perform only a…
Volkswagen Jetta
(2010-2018 /
MK 6, A6)
In this tutorial, you will see how to reset the tyre warning light in a Volkswagen Jetta, a very simple and quick operation, to be done only after re…
Volkswagen Jetta
(2010-2018 /
MK 6, A6)
To reset the tyre pressure warning light on the Volkswagen Jetta, first turn on the ignition by turning the key in the ignition switch. Once the dash…
Other guides you may be interested in
|
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.110
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
