Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

DIY for Volkswagen T-Roc

Model: Volkswagen T Roc MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

This video explains how to perform routine maintenance on a Volkswagen, specifically how to replace the air filter. Once you have opened the bonnet, locating the air filter is easy; just follow the pipe from the dashboard to the air filter housing.

Disconnect the air filter and electrical connector from both ends. Next, use a clamp pliers to remove the clip and disconnect the air pipe.

Now you can access the air filter box and remove the cover. Simply replace the air filter and reverse the previous steps, reassembling everything and checking for proper operation.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2021 Volkswagen T-Roc?
How to Reset the Service Light on the 2021 Volkswagen T-Roc?
Volkswagen T Roc (2017-2025 / MK 1) When performing a DIY service on your 2021 Volkswagen T-Roc, you will need to reset the service reminder. Follow the instructions in the video provid…
How to Activate the Infotainment System on a Volkswagen T-Roc
How to Activate the Infotainment System on a Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) Before you can start, sit in the driver's seat of your Volkswagen T-Roc. The infotainment system consists of all the virtual controls within the onbo…
Where is the Fuse Box on a Volkswagen T-Roc?
Volkswagen T Roc (2017-2025 / MK 1) If you are unsure where the fuse box is located in your Volkswagen T-Roc, don't worry. Just follow this guide carefully to locate it without any diff…

    Frequently Asked Questions

    • T Roc 2017-2025 - Every how many km should the Volkswagen T-Roc be serviced? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos