Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the air filter on a Volkswagen T-Roc

Model: Volkswagen T Roc MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Air filter

See other generations:
Video tutorial

In this video we see how to change the air filter on a Volkswagen T-Roc: we open the hood and locate the filter box, which is close to the battery, fixed with seven star screws. We remove the old filter; the screws remain attached to the box, it is enough to loosen them; we lift the cover, clean the container from dust and residues before inserting the new filter, making sure it is perfectly aligned and flat: if it is crooked, the cover will not close properly.

We put the cover back on and tighten all the screws well. The replacement of this component has a frequency to be scheduled around 25,000 km (even less if we travel on very dusty roads).


Posted on 4 August 2025 by ScegliAuto


Related tutorials

DIY for Volkswagen T-Roc
DIY for Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) This video explains how to perform routine maintenance on a Volkswagen, specifically how to replace the air filter. Once you have opened the bonnet, …
How to change the cabin air filter of the Volkswagen T-Roc.
How to change the cabin air filter of the Volkswagen T-Roc.
Volkswagen T Roc (2017-2025 / MK 1) Let's see how to replace the cabin air filter in a Volkswagen T-Roc: the filter is located behind the glove compartment on the passenger side. After …
How to Replace the Cabin Filter in the Volkswagen T-Roc
How to Replace the Cabin Filter in the Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) To discover how to replace the cabin filter in your Volkswagen T-Roc (2017-2023), carefully read the following guide and follow the steps described. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos