Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of AUX IN Adapter

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Accessory kit

See other generations:
Video tutorial

To install the AUX IN adapter, first remove the car radio using the appropriate extraction keys. Insert the keys into the designated slots (located at the four corners) with the bevel facing inward, release the retaining springs, and pull the radio from its housing, disconnecting the plugs connected to it. Then, insert the adapter wiring plug, connecting the ground cable eyelet as well.

Pass the cable with the jack to connect to the auxiliary reader behind the console and let it exit laterally. Reposition the car radio and perform a functionality check.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing the Fuel Filter
Instructions for Replacing the Fuel Filter
Volkswagen Bora (1998-2005 / MK 6) This maintenance task is often overlooked as it is believed that the fuel filter should only be replaced for diesel engines, especially because the f…
Half Shaft Replacement Instructions
Half Shaft Replacement Instructions
Volkswagen Bora (1998-2005 / MK 6) Lift the vehicle and remove the front wheel (loosen the nuts before lifting); remove the central fixing nut of the half shaft from the hub, disconnec…
Replacement of Rear Shock Absorbers
Replacement of Rear Shock Absorbers
Volkswagen Bora (1998-2005 / MK 6) Replacing the rear shock absorbers is much simpler than the front ones since the springs are not attached to the shock absorber itself but are connec…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos