Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Rear Shock Absorbers

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Shocks

Replacing the rear shock absorbers is much simpler than the front ones since the springs are not attached to the shock absorber itself but are connected to the rear axle. Lift the vehicle and remove the rear wheel; place a support under the axle and undo the mounting bolt of the shock absorber to the axle; then remove the mounting bolts of the upper support plate to the wing frame and extract the shock absorber. Proceed in reverse for the installation of the new shock absorbers, first securing the upper plate and then the lower bolt.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Bora (1998-2005 / MK 6) Lift the vehicle on a ramp and remove the front wheel and the nut securing the strut to the support inside the engine bay; disconnect the brake wear …
Volkswagen Bora (1998-2005 / MK 6) Lift the vehicle with a jack and remove the rear wheel: for safety, it’s advisable to place the wheel under the rear axle as a makeshift stand. Relea…
Volkswagen Bora (1998-2005 / MK 6) The fuel filter is a component that needs to be replaced regularly. To proceed with this operation, ensure you have safety glasses and rubber gloves.…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos