Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Side mirror

See other generations:
This video is currently unavailable

Replacing the external wing mirror is very straightforward and the replacement part is easy to find in the aftermarket: before purchasing, check if the mirror has a demisting system; lever the back of the mirror to detach it and pull it away enough to disconnect the connectors for the demisting system; bring the new mirror close, connect the demisting wires, and align the fixing tabs with the corresponding support so that pressing the mirror into place secures it.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacement of Rear Shock Absorbers
Replacement of Rear Shock Absorbers
Volkswagen Bora (1998-2005 / MK 6) Replacing the rear shock absorbers is much simpler than the front ones since the springs are not attached to the shock absorber itself but are connec…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Volkswagen Bora (1998-2005 / MK 6) The cabin air filter is located outside the cabin, just under the windscreen, on the passenger side; unscrew the fixing screws of the plastic cover, …
Replacing the PCV Valve in Your Car
Replacing the PCV Valve in Your Car
Volkswagen Bora (1998-2005 / MK 6) A PCV valve is a useful device and one of the oldest emission control components in most vehicles. This valve returns partially burned gases from the…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos