Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located outside the cabin, just under the windscreen, on the passenger side; unscrew the fixing screws of the plastic cover, move the seal to remove the cap and extract the old filter; remove any dirt from inside the filter housing, apply the plastic support frame to the new filter and insert it into its housing respecting the direction of the airflow.

Then reassemble the cap and the seal.

After replacing the cabin air filter, it is recommended to also sanitise the cabin with a suitable spray.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Volkswagen Bora (1998-2005 / MK 6) The cabin air filter is located in the engine compartment, on the passenger side, just below the windscreen. Remove the seal and unscrew the fastenin…
Engine Air Filter Replacement
Engine Air Filter Replacement
Volkswagen Bora (1998-2005 / MK 6) You can change your car's air filter without necessarily going to a garage, thus saving on labour costs. Simply open the bonnet of your car, securing…
Replacement of Diesel Filter Cartridge
Volkswagen Bora (1998-2005 / MK 6) For this filter replacement, you will need: a T30 Torx spanner, a 10mm ratchet spanner with an extension, and the replacement cartridge with the rele…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos