Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Warning Light on a Polo 3

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Service warning light

See other generations:
Video tutorial

In this article, we will see the procedure to reset the maintenance light on a Volkswagen Polo 3. This procedure may be useful as the ECU might not detect the completed service. To reset the light, insert the key without turning it. Then, press the button located below the speedometer, keeping it pressed while starting the instrument cluster.

Wait for the message to appear on the display --- at this point, release the button and restart the cluster to verify that the procedure has been completed correctly. It is recommended to perform this procedure only after the service has been carried out.


Posted on 31 May 2026 by ScegliAuto


Related tutorials

How to Reset the Inspection Light on the Polo 6R
How to Reset the Inspection Light on the Polo 6R
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this article, with the help of a video, you will see how to reset the maintenance light on the Volkswagen Polo 6R. This procedure is necessary aft…
How to reset the service indicator on the Polo 9N
How to reset the service indicator on the Polo 9N
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In the following article we will see how to reset the service light of the Volkswagen Polo 9N. We recommend performing this procedure only after havi…
How to Reset the Tyre Pressure Light on the Polo 5
How to Reset the Tyre Pressure Light on the Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this article, with the help of a video, you will learn the procedure to reset the tyre pressure warning light on the Volkswagen Polo 5. The proced…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos