Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Polo 5

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part:

In this article, with the help of a video, you will learn the procedure to reset the tyre pressure warning light on the Volkswagen Polo 5. The procedure takes only a few seconds and requires no tools. To reset this light, first, turn on the ignition. After starting the ignition, open the glove compartment on the passenger side where the tyre pressure button is located. Press and hold it for a couple of seconds until you hear a beep; at this point, the light has been reset, and you can either restart the ignition or start the engine.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning light on the Volkswagen Polo
Resetting the tire pressure warning light on the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Today we will learn how to reset the tire pressure warning on the Volkswagen Polo; before resetting the TPMS sensors, it is necessary that all four t…
How to Reset the Tyre Pressure Light on a Volkswagen Polo
How to Reset the Tyre Pressure Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before starting, sit in the driver's seat of your Volkswagen Polo. Begin by inserting the key into the ignition and turning it to power on the instru…
How to reset the tire pressure sensor of the Volkswagen Polo
How to reset the tire pressure sensor of the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) The steps outlined in this guide will show us how to reset the tire pressure warning light (TPMS) of the Volkswagen Polo; before performing the reset…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos