Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service light in a Volkswagen Polo, a very simple and quick operation that should only be performed once all scheduled maintenance work is completed. Start by entering the cabin, then insert the key but leave it in the initial position.

Next, press and hold the "0.0/SET" button located in the centre of the dashboard, turn on the instrument cluster simultaneously, and after about a couple of seconds, release the button and then press the left one. Finally, complete the procedure by restarting the vehicle.


Posted on 4 June 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Before you begin, sit in the driver's seat of your Volkswagen Polo. Start by pressing and holding the button located beneath the speedometer. At the …
How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before starting, sit in the driver's seat of your Volkswagen Polo. Press and hold the button located below the right side of the multifunction displa…
How to Reset the Service Light on a Volkswagen Polo 9n3?
How to Reset the Service Light on a Volkswagen Polo 9n3?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) If you decide to perform the service on your Volkswagen Polo 9n3 yourself, replacing the engine oil, oil filter, and any other necessary work such as…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos