Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Parking brake

See other generations:
Video tutorial

To adjust the handbrake on the Volkswagen Polo, loosen the screws that secure the centre tunnel trim panel so that it can be completely removed. After removal, you will have access to the components located underneath.

Here, you will find the bolt that allows for cable adjustment: tightening the bolt will make the handbrake feel firmer and reduce the lever travel. Conversely, loosening the bolt will increase the lever travel and make it feel lighter.


Posted on 9 July 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake of the Volkswagen Polo?
How to Adjust the Handbrake of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To adjust the handbrake of the Volkswagen Polo, lift the part of the centre tunnel located immediately behind the base of the handbrake lever. Once t…
How to Adjust the Handbrake on a Volkswagen Polo?
How to Adjust the Handbrake on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To adjust the handbrake on the Volkswagen Polo, use a tool to pry off the cover of the storage compartment located in front of the handbrake. Once th…
How to Adjust the Handbrake on the Volkswagen Polo
How to Adjust the Handbrake on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today, you will learn the steps to adjust the handbrake on the Volkswagen Polo. Before adjusting the handbrake, check the wear condition of the rear …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos