Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake Cable of the Volkswagen Beetle

Model: Volkswagen Maggiolino MK 1 - Years 1938-1980
Part: Parking brake

Below are the instructions for adjusting the handbrake cable of the Volkswagen Beetle. First, get inside the cabin and start by removing the cover and gaiter of the handbrake lever to access the adjustment mechanism; in this case, the cabin is completely dismantled, allowing easy access to the adjustment mechanism. Tighten the cable adjustment screws, pulling the cable to increase the braking force; for the operation to be successful, the rear brakes must be in good condition.

Posted on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel of a Volkswagen Beetle?
How to remove the steering wheel of a Volkswagen Beetle?
Volkswagen Maggiolino (1938-1980 / MK 1) To disassemble the steering wheel of a Volkswagen Beetle, start by unhooking and removing the horn button, which is usually located in the center of …
How do you replace the spark plugs of the Volkswagen Beetle?
How do you replace the spark plugs of the Volkswagen Beetle?
Volkswagen Maggiolino (1938-1980 / MK 1) In order to replace the spark plugs of the Volkswagen Beetle, you will need to open the rear hatch of the vehicle, as on this model of car the engine…
How to Remove the Engine from a Volkswagen Beetle
How to Remove the Engine from a Volkswagen Beetle
Volkswagen Maggiolino (1938-1980 / MK 1) To remove the engine from its housing in a Volkswagen Beetle, open the rear hatch, as this model has a rear engine. To remove it from its housing, lo…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos