Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Suspension on a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Suspension system

See other generations:
Video tutorial

In this guide, you will find instructions to remove and replace the front suspension on a Volkswagen Polo. First, open the bonnet of the vehicle and start disconnecting the suspension at the top by undoing the fixing bolts; then, lift the vehicle and remove the front wheel, disconnecting the suspension at the bottom as shown in the video.

At this point, replace either just the spring or the entire suspension assembly, installing it correctly; similarly, replace the other front suspension.


Posted on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Suspension Arm on a Volkswagen Polo IV
How to Replace the Front Suspension Arm on a Volkswagen Polo IV
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this video, see how to replace the front suspension arm on a Volkswagen Polo IV: lift the car and secure it on a jack stand, then loosen the wheel…
Replacing the Wishbone of the Volkswagen Polo 4
Replacing the Wishbone of the Volkswagen Polo 4
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the front wishbone of the Volkswagen Polo, loosen the nuts on the front wheel and lift the car using a ramp. Remove the nuts and take off …
How to Replace the Front Headlight Bulb of a Volkswagen Polo?
How to Replace the Front Headlight Bulb of a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Good morning! Today, replace the front headlight bulb of your Volkswagen Polo. Start by opening the front bonnet. Next, unscrew and remove the rear c…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos