Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up AdBlue and Reset the Warning Light on the Volkswagen Touareg

Model: Volkswagen Touareg MK 2, 7P - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: AdBlue warning light

See other generations:
Video tutorial

The instructions in this guide will show you how to top up the AdBlue fluid in the Volkswagen Touareg and subsequently reset the warning light. First, open the rear boot and start removing the floor panel; also remove the spare wheel to access the AdBlue tank, unscrewing the cap and topping up with the appropriate container or directly at the pump, as shown in the video.

Once filled, check that the warning light has reset; if not, a diagnostic tool will be required.


Posted on 23 September 2026 by ScegliAuto


Related tutorials

How to Top Up AdBlue and Reset the Warning Light on a Volkswagen Touareg
How to Top Up AdBlue and Reset the Warning Light on a Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) Today we will see the instructions that will allow us to top up the AdBlue liquid, resetting the warning light and message on the Volkswagen Touareg.…
How to top up the AdBlue and reset the warning light on the Volkswagen Touareg
How to top up the AdBlue and reset the warning light on the Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) The instructions in this guide will show us how to top up the AdBlue fluid, resetting the warning light, on the Volkswagen Touareg. First, we get int…
How to Reset the AdBlue Warning Light on the Volkswagen Touareg?
How to Reset the AdBlue Warning Light on the Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) The procedure to reset the AdBlue warning light on the Volkswagen Touareg involves topping up the necessary amount of additive fluid in the respectiv…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos