Do it yourself
Frequently asked questions about cars and motorcycles

How to Activate the Front and Rear Fog Lights of the Volkswagen Polo

Model: Volkswagen Polo - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fog lights

See other generations:
Video tutorial

This guide provides instructions on how to activate the front and rear fog lights on the Volkswagen Polo. First, get in the vehicle and start the ignition and the engine. Then, rotate the light switch to turn on the position or dipped beam lights, and pull the switch to activate the fog lights, as shown in the video.

Once the switch is pulled, rotate it to activate the front or rear fog lights; press to deactivate the fog lights, returning the switch to its normal position.


Posted on 20 November 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) The main light control is located on the stalk to the left of the steering wheel or on a dial on the dashboard. First, ensure that the dipped headlig…
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) In this tutorial, you will see how to activate the fog lights on a Volkswagen Polo, a very simple and quick operation. First, enter the cabin, then i…
Volkswagen Polo (2001-2009 / Polo IV, MK IV, Polo 4, MK 4, 9N) This guide provides the main instructions for installing front fog lights on a Volkswagen Polo. First, move to the front of your car and start by rem…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos