Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Rear Headlamp Bulb on VW Caddy

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Tail light bulb

Are the bulbs in the Volkswagen Caddy's headlamp due for replacement? Here’s how to change them. Open the boot lid, and remove the plastic cover over the screws. Use a screwdriver to undo the securing screws located at the side of the headlamp (right side). Once all screws are removed, detach the rear headlamp from its housing (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage). Refit the headlamp with the screws and reconnect the power connectors. Turn on the headlamps using the ignition switch and check their operation.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Volkswagen Caddy
Replacing Front Headlight Bulb on Volkswagen Caddy
Volkswagen Caddy (2003-2020 / MK 3, 2K) In this video, we will see how to remove the front headlight bulb on a third-generation Volkswagen Caddy. First, open the bonnet from the inside: in …
Where is the fuse box located in the Volkswagen Caddy?
Where is the fuse box located in the Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) In this new mini guide dedicated to your new Volkswagen Caddy second generation (2020-2023), we will discover where the box containing all the vehicl…
Replacing the CV Boot on the Volkswagen Caddy 3
Replacing the CV Boot on the Volkswagen Caddy 3
Volkswagen Caddy (2003-2020 / MK 3, 2K) Discover how to remove and replace the front CV boot on the Volkswagen Caddy Mk3 by following the instructions below. First, lift the vehicle and rem…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos