Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Air Filter on a VW Golf

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Air filter

See other generations:
Video tutorial

Replace the worn air filter on a Volkswagen Golf. Here's how to proceed. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the bonnet, securing it with the prop rod. Unclip the metal clips on the sides of the container, open the air kit, remove the cover of the filter box, and extract the worn air filter.

Insert a new filter into the designated housing (ensuring it fits snugly around the edges). Finally, reattach the cover of the air box and secure the metal clips.

Close the bonnet after maintenance. Start the vehicle and test its operation.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This guide explains how to replace the air filter on a Volkswagen Golf model 4. Start the replacement by opening the front bonnet and then disconnect…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) If you want to replace the cabin air filter in your Volkswagen Golf Mk6 yourself, follow the procedure described in this guide. First, purchase a new…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The air filter on a Volkswagen Golf model mk7 is located under the front bonnet, specifically on the right side near the air duct and engine. To repl…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos