Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Loudspeaker replacement on Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Door panel
Operation: Loudspeaker replacement on Vw Polo

Replacing the speakers on a Polo? How to do? We see. With a lever we detach the plastic covering the handle placed on the door panel, then we detach the piece (as in the video) and unscrew the fastening screws with a screwdriver. With the plastic lever we release all the clips by levering around the entire perimeter of the door. We pull the panel away by grabbing it with our hands (we unhook the cable of the opening lever, the clamps of the window lifters). Unscrew the speaker screws and remove it from the door after disconnecting the terminals. We mount the new speaker and screw in the mounting screws. We mount the door panel with the handle cable and all the previously disassembled pieces.


Posted on 3 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 1994-2003 - How do you remove the Volkswagen Polo door panel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos