Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on VW Golf 3

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Door trim panel

See other generations:
Video tutorial

Replace the door panel if it is not repairable on a Volkswagen Golf 3. Remove the left panel. Take off the manual window winding handle (if present) and detach the cover of the internal handle.

Using a screwdriver, unscrew the screws located in the handle area. Unscrew the remaining screws on the door panel and detach the retaining clips.

Finally, pull off the panel by hand and detach it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door and replace the damaged panel.

Fit the new door panel.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of a Volkswagen Golf
Removing the Door Panel of a Volkswagen Golf
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) Remove the door panel of a Volkswagen Golf (driver's side). Before starting the disassembly, disconnect the battery terminals located in the engine b…
Removing the Door Panel of a Volkswagen Golf 4
Removing the Door Panel of a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Let's remove the door panel of a Volkswagen Golf 4 (driver's side), and see how to proceed. Before starting the disassembly, disconnect the battery t…
Removing the Right Front Door Panel of a Volkswagen Golf Mk5
Removing the Right Front Door Panel of a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Perform the removal of the right front door panel of a Volkswagen Golf Mk5. Disconnect the battery terminals in the engine bay. Use a screwdriver to …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos