Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heat Exchanger on a Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Air conditioning

See other generations:
Video tutorial

Replacing the heat exchanger is a lengthy process that requires good attention and memory to disassemble and reassemble everything. This video will provide a reminder to guide you through the operation.

Due to time constraints, the disassembly of the dashboard has been excluded from the footage, but you can find it in other videos. After removing this, you will need to disconnect all components that are mounted on the central bar and all wiring anchored to it. After that, you can extract the ventilation system box from the cabin, and once the clips are removed, disassemble the heat exchanger.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Heat Exchanger on a Volkswagen Golf 4
How to Replace the Heat Exchanger on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the heat exchanger on a Volkswagen Golf 4, you must practically dismantle the entire dashboard of the car, disconnecting all the plastic c…
What causes the lack of heating in the interior of a Volkswagen Golf V?
What causes the lack of heating in the interior of a Volkswagen Golf V?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let's see what causes the lack of heating in the cabin of the Volkswagen Golf V (and similar models): Air comes out of the vents, but it is not warm,…
Removing the Cabin Heater Radiator of the Volkswagen Golf Mk5
Removing the Cabin Heater Radiator of the Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you will learn how to remove and replace the cabin heater radiator of the fifth generation Volkswagen Golf. First, open the b…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos