Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heat Exchanger on a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the heat exchanger on a Volkswagen Golf 4, you must practically dismantle the entire dashboard of the car, disconnecting all the plastic components that make it up. By loosening the appropriate screws and releasing the retaining clips, you will be able to remove the dashboard and access its internal components.

Next, open the bonnet and remove the grille located at the base of the windscreen to also disconnect the connectors attached to the exchanger, allowing it to be removed by unscrewing the appropriate fixing screws with the correct screwdriver.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Heat Exchanger on a Volkswagen Golf
How to Replace the Heat Exchanger on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Replacing the heat exchanger is a lengthy process that requires good attention and memory to disassemble and reassemble everything. This video will p…
What causes the lack of heating in the interior of a Volkswagen Golf V?
What causes the lack of heating in the interior of a Volkswagen Golf V?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let's see what causes the lack of heating in the cabin of the Volkswagen Golf V (and similar models): Air comes out of the vents, but it is not warm,…
Removing the Cabin Heater Radiator of the Volkswagen Golf Mk5
Removing the Cabin Heater Radiator of the Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you will learn how to remove and replace the cabin heater radiator of the fifth generation Volkswagen Golf. First, open the b…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos