Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Speaker in a Golf 7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Speaker

See other generations:
This video is currently unavailable

Remove the speaker from the Volkswagen Golf 7. Start by taking off the protective panel above the door to access the speaker. Use a trim tool to remove the handle cover above the panel (screws inside), then unscrew the fastening screws located in the plastic handle and throughout the panel.

Once all screws are removed, use the trim tool to detach all the plastic clips securing the door. Pull the door panel away with your hands, disconnect the power connectors and release cable.

Unscrew the screws securing the speaker and remove it (disconnect the electrical connectors). Install the new speaker and refit the cover panel.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Removing Speakers on Volkswagen Golf MK4
Removing Speakers on Volkswagen Golf MK4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today we will see the instructions that will allow us to remove and replace the speakers on a fourth-generation Volkswagen Golf. First, open the fron…
Remove the Door Panel of a Volkswagen Golf 5
Remove the Door Panel of a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Remove the door panel of a Volkswagen Golf 5 (passenger side). Before starting the disassembly, disconnect the battery terminals located in the engin…
Removing the Lock Cylinder on Volkswagen Golf 4
Removing the Lock Cylinder on Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to remove the lock cylinder from a fourth-generation Volkswagen Golf. The essential steps will be illustra…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos