Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Lock Cylinder on Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Door lock

In this video tutorial, you will learn how to remove the lock cylinder from a fourth-generation Volkswagen Golf. The essential steps will be illustrated, so first remove the inner door panel and disconnect the window and speaker cables. Then remove the window motor using a Torx key and take off the caps to access the screws to unscrew. Once the tweeter is removed, take out the glass. At this point, unscrew the screws on the sides at the handle height (including the internal ones with a Torx T20) and use a plastic lever to remove it along with the cylinder: disassemble the inner panel and remove the lock cylinder as shown in the video!

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this guide, follow the necessary instructions to remove and replace the lock cylinder of the front door of the Volkswagen Golf. First, open the fr…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video, we will see how to replace the lock cylinder on the door of a Volkswagen Golf Mk4. First, open the car door and, after removing the si…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Discover how to remove and replace the steering lock and ignition cylinder on the fourth generation Volkswagen Golf, as well as the Jetta. First, get…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - What to do if the door on Golf 5 does not open? Read answer

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos