Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Removing the internal ceiling light pole 9

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Interior lights ceiling light bulb
Operation: Removing the internal ceiling light pole 9

Removing the interior ceiling light on this car is very simple. Preliminarily it is necessary to detach the front part of the ceiling light from its housing by pulling it vigorously with your hands; then, with the help of a plastic lever, remove the part of the ceiling light containing the bulbs by acting on the fixing tabs placed on the four sides (at this stage, be careful not to force the tabs too much as they could break). Once the ceiling light has been removed, you can replace the lamps with others of the same type. Once the lamps have been replaced, proceed to reinsert the ceiling light and the front piece in their housing with a simple pressure until you hear a click of the tabs.


Posted on 15 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Why don't the Volkswagen Polo interior lights work? Read Answer
    • Polo 2001-2009 - Why do the interior lights on my Volkswagen Polo Mk4 no longer work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos