Do it yourself
Frequently asked questions about cars and motorcycles

Resetting Tyre Pressure Light on Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Tire pressure warning light

See other generations:
Video tutorial

In this quick and simple video tutorial, you will see how to reset the tyre pressure light on a Volkswagen Passat. Before performing the reset, ensure that you have resolved any issues causing a pressure reading different from the standard.

Then, get inside the vehicle and turn on the ignition: at this point, press and hold the set button located near the gear lever until the light goes out: if there are no issues, the light will disappear; otherwise, it will remain illuminated.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) In this guide, we will see how to reset the tyre pressure light on the Volkswagen Passat. Before recalibrating the TPMS sensors, ensure all four tyre…
Volkswagen Passat (2010-2014 / B7) In this tutorial, you will learn how to reset the tyre pressure monitoring system (TPMS) light on a fourth-generation Volkswagen Passat. Before perfo…
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) The information in this guide will show you the procedure to reset the tyre pressure monitoring system (TPMS) warning light on the Volkswagen Passat;…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos