Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Gear Knob and Gear Lever Gaiter

Model: Volkswagen Maggiolino MK 1 - Years: 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Part: Shifter boot

See other generations:
Video tutorial

Once the knob of the old gear lever is removed, unscrew the two fixing pins of the flange that connects the gear lever to the centre tunnel (be careful of the spring located just below the lever). Then apply the new shaped plate, clean and grease the gear lever housing, and insert the new lever complete with rubber gaiter, tightening the two fixing pins of the flange at the base of the lever; finally, check the correct operation of the lever for engaging the gears and the side button for engaging reverse.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Volkswagen Maggiolino (1938-1980 / MK 1) Start by removing the seats and the central tunnel cover to facilitate access to the gear lever, also removing the gear lever's gaiter; at this point…
Volkswagen Maggiolino (1938-1980 / MK 1) To facilitate the removal of the metal parts to be replaced, first remove the doors: remove the circlip from the hinge pin, then extract the pin and …
Volkswagen Maggiolino (1938-1980 / MK 1) Replacing the auxiliary belt on this vehicle is extremely simple as the alternator pulley is practically made up of two pieces: just loosen the centr…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos